Industry News

鈪�. The installation method of cistern float valve1. Before the installation of the cistern float valve, first, remove the protection covers on both sides of the flange end of the float level valve, a...

鈪�. The working principle of dynamic balancing valveThe dynamic balancing valve is composed of the automatic regulating valve disc and manual regulating valve disc. The working pressure of the system ...

1. The dynamic balancing valve has good balancing functionThe dynamic balancing valve can balance the system flow automatically at the required set value2. The dynamic balancing valve can improve heat...

A. Design and arrangement principle of manual balancing valveThe manual balancing valve should be installed level by level, that is, the valve should be installed on the main pipe, stand pipe and bran...

Gate valves are cut-off valves and are usually installed on pipes with a diameter greater than 100mm to cut off or connect the flow of medium in the pipe. Because the disc is a gate type, it is common...

1. The difference in valve seat structureThere is a spring inside the valve seat of the ball valve. The sealing design of the valve seat makes it difficult for the scum in the medium to enter the valv...

The balance valve is a regulating valve with a special function of digital locking. It adopts a direct-flow valve body structure and has a better equal percentage flow characteristic. It can distribut...

1. In order to prevent the medium from flowing back, non-slam check valves should be installed on the equipment, devices and pipelines;2. Non-slam check valves are generally suitable for clean media, ...