Technical Help

Pond overflow

1. Pilot  valve rubber gasket damaged;

2. The float weld is leaking;

3. The connecting rod piston is stuck by a foreign body;

1. Replace the gasket;

2. Replace the float ball;

3. Removing debris;

Low Water Level

1. Debris in the pilot body锛�

2. The connecting rod piston is stuck by a foreign body锛�

1. Removing debris;

Abnormal Noise

1. Debris in the valve body;

2. The closing speed is not reasonable

1. Removing debris;

2. Adjust needle valve opening;

The Disc cannot be Closed or Closed Properly

1. Catheter rupture or leakage at its junction;

2. The spring in the main valve breaks or for other reasons causes the diaphragm to break;

3. Check valve failed;

4. The pilot valve failed;

5. Sealing surface damage;

6. Debris in the valve body;

1. Replace the catheter or tighten its connector;

2. Check the spring锛�

3. Repair or replace check valves;

4. Repair or replace pilot valves;

5. Replace the sealing surface;

6. Removing debris;

Leakage at Valve Body and Bonnet Joint

Gasket damage;

Replace the new gasket;